Description complète
Hall effect joystick for the Odin 2: an end to the drifting stick
After a few hundred hours, a potentiometer stick eventually starts to drift: the character walks on its own, the cursor slides. This spare part replaces the module with a Hall effect joystick, with no mechanical contact, on the Odin 2, Odin 2 Mini and Odin 2 Portal handheld consoles. The caps can also be ordered on their own, when only the rubberised surface is worn.
What it does
- Replaces a worn stick: the module is a complete joystick, designed as a spare part for the Odin 2.
- Hall effect technology: the position is read magnetically, with no carbon track that wears out — the usual cause of drift disappears.
- Caps sold separately: in packs of 2 or 4, to get the grip back without opening the console if the module still works.
What it doesn't do
- This is not an upgrade to how the controls feel: it is a spare part. Do not count on it to transform the original travel or precision.
- The cap variants (2 MZ, 4 MZ) contain no module: they will not repair a stick that drifts.
- Drift caused by the motherboard, a torn-off connector or badly calibrated firmware is not solved by changing the stick.
- A part intended for the Odin 2: we do not guarantee the fit on any other handheld console.
- No disassembly instructions are supplied with the part.
Compatibility
Odin 2, Odin 2 Mini and Odin 2 Portal. The module is a replacement joystick dedicated to those three machines; it is not intended for Anbernic, Retroid or Powkiddy consoles, nor for home controllers. The caps fit the sticks of the same models. If you are unsure about your revision, open the console and compare the module before ordering.
Skill level required
Replacing the module means opening the console's shell and working on the board: this is a job for a confident tinkerer, not an everyday gesture. Plan for a precision Phillips screwdriver, a plastic opening pick and a clear work surface. We do not claim the job can be done without a soldering iron: the method depends on your console's revision, so check it before ordering. Changing the cap, on the other hand, is done by hand with the console closed.
In the box
- 2 YG variant: 2 Hall effect joystick modules.
- 2 MZ variant: 2 joystick caps.
- 4 MZ variant: 4 joystick caps.
- Colour of your choice: black, grey or white. No tools, no instructions, no screws.
Page checked on 19/08/2026.
Read before ordering: Workshop & modding
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.
Hall effect joysticks and thumb caps for the Odin 2, Mini and Portal
Spare part for the Odin 2, Odin 2 Mini and Odin 2 Portal: Hall effect joystick module, or caps on their own.
En stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷SAV français
réponse sous 1 jour ouvré - 🛡Garantie légale
2 ans - ↩14 jours
pour changer d’avis - 🔒Paiement sécurisé
CB · PayPal · Klarna
The day the console starts playing by itself
A handheld running every evening always ends up with the same symptom: the menu scrolls without anyone touching anything, the character heads off to the left. On conventional sticks, a carbon track rubs under your finger, season after season, until it sends back wrong values. It is not a software bug, it is mechanical wear. And it can be replaced.
Why a Hall effect module
A Hall effect joystick reads the position not by friction but through a magnetic field: nothing touches any more, so nothing wears out at that spot. That is why an original stick is replaced with a module of this type rather than with a part identical to the one that has just failed. The module offered here is made for the Odin 2, Mini and Portal.
What we tell you before you buy
This is not a part you clip on from the outside: you have to open the console and work on the board, and the method depends on your revision. If your stick responds correctly and only the rubberised surface has gone shiny, take the caps on their own: that is two minutes, with the console closed, and it costs three times less. Page checked on 19/08/2026.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- Magnetic Hall effect reading: no carbon track that wears out
- Spare part dedicated to the Odin 2, Odin 2 Mini and Odin 2 Portal
- Caps available on their own, in packs of 2 or 4
- Three colours: black, grey, white
Ce qu’il ne fait pas
- The 2 MZ and 4 MZ variants contain only caps, no module
- Does not fix drift coming from the motherboard or a damaged connector
- Replacing the module means opening the console: for a confident tinkerer
- No tools and no disassembly instructions in the box
- Fit not guaranteed on any console other than the Odin 2
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- Replacement joystick
Compatible avec
- Odin 2
- Odin 2 Mini
- Odin 2 Portal
Dans la boîte
- 2 YG variant: 2 Hall effect joystick modules
- 2 MZ variant: 2 joystick caps
- 4 MZ variant: 4 joystick caps
- Colour of your choice: black, grey or white
- No tools, no instructions, no screws
Frequently Asked Questions
🎮 Which consoles does this part fit?
The Odin 2, Odin 2 Mini and Odin 2 Portal. It is intended neither for Anbernic, Retroid or Powkiddy consoles, nor for home controllers.
🕹️ What is the difference between the YG and MZ variants?
The 2 YG variants contain 2 complete joystick modules. The 2 MZ and 4 MZ variants contain only caps, 2 and 4 respectively.
🌀 Does it fix drift?
A Hall effect module removes the most common cause of drift, the wear of the carbon track. If the fault comes from the motherboard or a damaged connector, changing the stick will change nothing.
🔧 Do you have to solder to change the module?
We do not claim so: the method depends on your console's revision. Check how your model comes apart before ordering. Changing the cap, on the other hand, is done by hand.
🧰 Which tools do I need?
A precision Phillips screwdriver and a plastic opening pick for the module. Nothing at all for the caps. No tool is supplied in the box.
⏱️ How long does the job take?
Allow a few minutes for a cap. For the module, opening the console and replacing it call for care: set aside an hour and a clear work surface.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns. Reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le