Full description
1.1 mm VHB foam tape: fix parts without screws, without glue oozing out
When you fit an IPS screen kit into a handheld console, wedge a Li-ion battery into the bottom of a shell or press a ribbon cable along a housing, a screw is almost never an option. This 1.1 mm thick double-sided acrylic foam tape does the job: it holds firmly, it makes up for minor unevenness, and it cuts to the length you need with scissors.
What it does
- 1.1 mm thickness: the foam fills the gap between the panel and the shell, where a thin adhesive leaves a gap visible in raking light.
- Eight widths, from 5 to 50 mm: 5 and 8 mm around a handheld screen, 15 to 20 mm for a battery or a speaker, 30 to 50 mm for a plate, a mount or a bartop panel.
- 3-metre roll: enough to do several consoles with a single purchase, without buying a new strip for every project.
- Black foam: invisible behind a tinted lens or a dark front panel, unlike a clear adhesive that shows every bubble.
What it doesn't do
- It is not a repositionable adhesive. Once the strip is pressed down, removing it takes nylon thread, isopropyl alcohol and patience: dry-fit the part before peeling off the protective liner.
- It does not replace a mechanical fixing on a part under repeated stress: hinge, trigger, heavy screen mount on an arcade cabinet.
- Adhesion drops sharply on soft plastics (PP, PE, silicone) and on any greasy, dusty or freshly painted surface. Degreasing is not optional.
- We do not state any brand or original part number. This roll is sold for what we can say about it: double-sided acrylic foam, 1.1 mm, 3 m, width of your choice.
- Long-term resistance outdoors, to UV and to high heat is not documented by the supplier: we do not claim it.
Compatibility
Generic workshop tape, not tied to any specific console. It bonds well to the rigid plastics of shells (ABS, polycarbonate), to the glass and acrylic of screen lenses, to painted or bare metal and to coated circuit boards. It is not suitable for soft plastics such as PP and PE, open-cell foams, fabrics, or surfaces that heat up beyond normal household use. On a handheld console, the 5 and 8 mm widths are the only ones really practical around a panel.
Skill level required
None. No soldering, no cutting the shell, no specialist tools: scissors or a craft knife are enough to cut the length you need. The only step not to rush is preparation: degrease both surfaces with isopropyl alcohol, let them dry, apply, then press for about thirty seconds. An acrylic adhesive reaches its working strength after a few hours and its maximum strength after one to three days — avoid putting stress on the part during that time.
In the box
- 1 roll of double-sided foam adhesive tape, 1.1 mm thick, 3 metres long
- Width according to the selected variant: 5, 8, 10, 15, 20, 30, 40 or 50 mm
Read before ordering: Gaming accessories
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.
1.1 mm VHB double-sided foam tape — for fixing IPS screens and batteries
1.1 mm double-sided acrylic foam, 3 m roll, eight widths from 5 to 50 mm: the workshop adhesive for fixing an IPS screen, a battery or a shell without drilling.
In stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee of conformity · 14-day returns.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: sticking what can't be screwed
Open any handheld console from the 1990s: half of what holds together inside is held by adhesive, not by screws. Screen lens, ribbon cable, speaker, foam padding. When you reassemble a machine after an IPS kit or a battery replacement, those bonds have to be redone. That is exactly what this roll is for.
The strip: foam, not sticky tape
A thin double-sided tape bonds two perfectly flat surfaces. A retro console has none: the plastic is thirty years old and has warped. The 1.1 mm foam backing absorbs these irregularities and spreads the pressure instead of concentrating it on three points. That is the reason for this thickness, not a sales pitch.
Support: the right width first time
Eight widths are available because a screen surround and a bartop panel have nothing in common. 5 and 8 mm around a panel, 15 to 20 mm for a battery or a speaker, 30 to 50 mm for a plate or a mount. If you are unsure about your build, write to us: reply within 1 business day.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- 1.1 mm foam that fills the gap between the panel and the shell
- Eight widths from 5 to 50 mm to cover every workshop job
- 3 m roll: several consoles with a single purchase
- Black foam, invisible behind a tinted lens
- Cuts with scissors, no specialist tools
What it doesn’t do
- Not repositionable: dry-fit the part before peeling off the liner
- Does not replace a mechanical fixing on a hinge or stressed part
- Weak adhesion on PP, PE, silicone and greasy or dusty surfaces
- Degreasing with isopropyl alcohol essential before application
- Maximum strength only reached after one to three days
- No brand or original part number stated
- UV and high-temperature resistance not documented
See full specifications+
Material and size
- Accessory type
- Double-sided foam adhesive tape
Compatible with
- IPS retrofit screen kits
- Handheld console shells
- Li-ion batteries
- Glass or acrylic screen lenses
- Bartops and arcade cabinets
- Rigid ABS and polycarbonate plastics
- Metal and painted surfaces
In the box
- 1 roll of double-sided foam tape, 1.1 mm thick, 3 m long
- Width according to the selected variant: 5, 8, 10, 15, 20, 30, 40 or 50 mm
Information and safety
Instructions for use and legal information about the product
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔧 Do I need to solder or cut anything?
No. The tape cuts to the length you need with scissors or a craft knife. No soldering, no cutting the shell, no specialist tools.
🧼 How should I prepare the surfaces before sticking?
Degrease both surfaces with isopropyl alcohol, let them dry completely, apply the strip and then press for about thirty seconds. This is the step that determines how well it holds.
📏 Which width should I choose for an IPS screen kit?
5 or 8 mm around a handheld console panel, 15 to 20 mm for a battery or a speaker, 30 to 50 mm for a plate, a mount or a bartop panel.
♻️ Can the tape be removed without breaking the part?
It is possible but slow: nylon thread worked like a saw under the part, then isopropyl alcohol for the residue. An acrylic foam adhesive is not designed to be repositioned.
🔋 Can this tape hold a Li-ion battery in place?
Yes, it is a common use in modding to secure a battery at the bottom of a shell. However, avoid using it as the only fixing for a heavy part or one exposed to knocks.
📦 What's in the box?
One roll of double-sided foam tape, 1.1 mm thick and 3 metres long, in the selected width (5 to 50 mm). Nothing else.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ Which guarantee applies?
2-year legal guarantee of conformity. 14-day returns. French-speaking customer service, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on






















