Full description
Replacement speaker: the sound comes back, without the crackle
On a thirty-year-old console, the sound goes before the screen does. The cone warps, the coil absorbs moisture, and all that is left is a muffled hiss. This replacement speaker is chosen by impedance and diameter, to restore the original sound level on a handheld, a home console or a DIY project. Sold in pairs.
What it does
- Three impedances: 8 Ω, 16 Ω or 32 Ω, to be chosen according to what is marked on the original speaker or on the board schematic.
- Seven diameters: 20, 21, 23, 27, 29, 36 and 40 mm, to fit the existing housing without modifying the shell.
- Sold in pairs: a spare part in reserve, or both channels of a stereo console restored in a single order.
What it doesn't do
- It does not increase the volume: the power is determined by the console's amplifier, not by the speaker.
- It does not fix distorted sound caused by a worn capacitor, a dirty potentiometer or a broken trace.
- No list of compatible consoles is provided: it is up to you to note the diameter and impedance of the original part before ordering.
- The wires are not pre-soldered to a ribbon cable: you need to resolder the two original wires.
- This is not a powered speaker: no battery, no Bluetooth, no enclosure.
Compatibility
Compatibility comes down to two figures, not a console name: the impedance (8, 16 or 32 Ω) and the diameter (20 to 40 mm). Measure the original speaker with a calliper and read the impedance printed on the magnet or in the machine's schematic. An impedance lower than the original makes the audio stage run hot: do not go below the original value. These speakers are also suitable for audio modules, salvaged amplifiers and DIY projects up to 0.5 W.
Skill level required
Opening the shell and soldering two wires. A 30 to 40 W soldering iron, solder, desoldering braid and a screwdriver suited to your console (Phillips, tri-wing or Torx depending on the machine) are all you need. Allow twenty to thirty minutes the first time. Whether it is glued or clipped in depends on the original housing: plan a dab of glue if the original part was glued.
In the box
- 2 speakers of the chosen model (impedance and diameter selected when ordering).
Read before ordering: Retro Peripherals
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.
Replacement speaker for retro consoles — 8/16/32 Ω, pack of 2
Choose the impedance and diameter of your original part: 8, 16 or 32 Ω, from 20 to 40 mm. Pack of 2.
In stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee of conformity · 14-day returns.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
Sound is the first thing to go
On a console that has spent thirty years in a box, the screen often holds up better than the sound. The cone caves in, the coil glue dries out, and moisture does the rest. The result is always the same: a muffled hiss, a crackle in the bass, volume that cuts out when you shake the machine. The speaker is a wear part, not a fragile electronic component — and that is good news, because it can be replaced.
Two figures, not a console name
You don't choose a speaker by the name of the machine but by impedance and diameter. The impedance — 8, 16 or 32 Ω — must be at least equal to that of the original part, otherwise the audio stage will run hot. The diameter, from 20 to 40 mm, must fit the existing housing so that no cutting of the shell is needed. Note these two values on the old part before ordering: it is the only check that matters.
What a new speaker won't fix
A new speaker gives clean sound, not louder sound: the power comes from the console's amplifier. If the sound is still distorted after the replacement, the cause lies elsewhere — capacitors to recap, a dirty volume potentiometer, a broken trace. And nothing is pre-wired here: you have to desolder the two original wires and solder them back on. Twenty to thirty minutes of work, a soldering iron, no fine electronics.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- Three impedances available: 8, 16 and 32 Ω
- Seven diameters from 20 to 40 mm
- Sold in pairs, one spare part in reserve
- Power 0.25 W or 0.5 W depending on the model
What it doesn’t do
- Does not increase the volume: the console's amplifier remains the limiting factor
- Does not fix sound distorted by a worn capacitor or potentiometer
- Soldering two wires required, nothing is pre-wired
- No list of compatible consoles: diameter and impedance must be noted yourself
See full specifications+
Material and size
- Accessory type
- Replacement speaker
Compatible with
- Retro handheld consoles (depending on diameter and impedance)
- Retro home consoles
- Arcade cabinets and DIY projects
- Audio modules and amplifiers 0.25 to 0.5 W
In the box
- 2 speakers of the chosen model
Information and safety
Instructions for use and legal information about the product
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔧 Do I need to solder to install this speaker?
Yes. The two original wires are desoldered from the old part and resoldered onto the new one. A 30 to 40 W iron and solder are all you need; no SMD soldering is required.
🎮 How do I know which model to choose?
Two figures decide: the impedance (8, 16 or 32 Ω) and the diameter (20, 21, 23, 27, 29, 36 or 40 mm). Measure the original part and note the value printed on the magnet or given in the console's schematic.
🔊 Will it increase my console's volume?
No. The sound level depends on the console's amplifier. This speaker restores the original sound; it does not push it any further.
📦 What is in the box?
2 speakers of the selected model. No wires, no glue, no protective grille.
🧰 What tools do I need?
A screwdriver suited to your machine (Phillips, tri-wing or Torx), a soldering iron, solder, desoldering braid and a plastic opening tool.
⏱️ How long does the replacement take?
Twenty to thirty minutes the first time, including opening and closing the shell. Suitable for a motivated beginner, as long as you can solder two wires.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ Which guarantee applies?
2-year legal guarantee of conformity. 14-day returns. French customer service, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on





























