Full description
WH148 potentiometers: restore smooth adjustment to a scratchy volume control
On an arcade cabinet, a cabinet amplifier or a home-made control panel, a control that crackles or no longer holds its position is almost always a worn rotary potentiometer. The WH148 is the most common reference for this kind of replacement: 15 mm shaft, 3 solder pins, panel mounting. Sold in packs of 10 in a single value, the one you choose.
What it does
- Replaces a panel potentiometer: standard WH148 format, 15 mm knurled shaft, rotary carbon-film body.
- Wires up at three points: 3 solder pins, with no socket or proprietary connector.
- Supplied ready to mount: mounting nuts and washers are included with the components.
- Pack of 10 in a single value: enough to fit out an entire panel or keep spare parts in stock.
What it doesn't do
- This is not an assortment: each pack contains 10 units of the single value selected, not a set of different values.
- The track is linear, not logarithmic. On an audio volume control, the progression will feel uneven: for sound, a logarithmic track is more comfortable.
- Does not replace the original volume wheel of a handheld console (Game Boy, Game Boy Advance, PSP): those parts are miniature and a completely different format.
- No knob or shaft cap is included — reuse the one from the old potentiometer or order one separately.
- The manufacturer discloses neither a precise power rating nor a resistance tolerance: don't use them in a circuit where these values are critical.
Compatibility
Suitable for any build that accepts a 3-pin WH148 rotary potentiometer: arcade machines and cabinets, amplifier volume stages, control panels and DIY enclosures, audio modules. Before ordering, note the value in ohms of the original part and check the panel's hole diameter. Not suitable for slide potentiometers, rotary encoders, surface-mount (SMD) potentiometers or PCB trimmers.
Skill level required
Soldering required: three pins to desolder on the old part, three to solder on the new one. A fine-tip iron, solder, desoldering braid and a screwdriver for the mounting nut are all you need. Allow about ten minutes per potentiometer once the panel is open. If you've never desoldered a through-hole component, practise on a salvage board first.
In the box
- 10 WH148 rotary potentiometers, 15 mm shaft, 3 pins, in the selected value
- Mounting nuts and washers
Read before ordering: Gaming Accessories
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.
WH148 potentiometers, 15 mm shaft, 3 pins — pack of 10, nuts included
Pack of 10 carbon-film rotary potentiometers, 15 mm shaft, 3 pins — value of your choice, nuts and washers included.
In stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: restoring a clean adjustment
A potentiometer that crackles, a volume that jumps as soon as you brush the knob, a control that only responds over half of its travel: the carbon track has worn, and no amount of cleaning brings it back for good. The replacement takes about ten minutes once the panel is open. Three pins to desolder, three to solder, the nut to tighten, and the control regains continuous travel from minimum to maximum.
The part: why the WH148
The WH148 is the most widespread rotary potentiometer in panel builds: 15 mm knurled shaft, three solder pins, carbon-film body. That's why you find it in arcade machines, amplifier volume stages and home-made enclosures. Here, it's sold in packs of 10 in a single value: from 1 kΩ to 1 MΩ, you choose the one that matches the original part.
The limitation to know before buying
These potentiometers have a linear taper. On a voltage, brightness or sensitivity control, that's exactly what you need. On an audio volume control, your ear will perceive an uneven progression, concentrated at the start of the travel: that's what a logarithmic track is for. And they don't replace the volume wheel of a handheld console, which is a much smaller format. Note the value in ohms of the original part before ordering.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- Standard WH148 format, 15 mm knurled shaft
- 3 solder pins, panel mounting
- Carbon-film track, linear taper
- Mounting nuts and washers included
- Pack of 10 in a single value
What it doesn’t do
- Single-value pack, not an assortment of different values
- Linear track: uneven progression on an audio volume control, where a logarithmic track is preferable
- Doesn't replace the original volume wheel of a handheld console, which is a much smaller format
- Knobs and shaft caps not included
- Power rating and resistance tolerance not disclosed by the manufacturer
- Soldering and desoldering required
See full specifications+
Material and size
- Accessory type
- Electronic component — rotary potentiometer
Compatible with
- Arcade machines and cabinets
- Amplifiers and audio modules
- Control panels and DIY enclosures
- Any build accepting a 3-pin WH148 potentiometer
In the box
- 10 WH148 rotary potentiometers, 15 mm shaft, 3 pins, in the selected value
- Mounting nuts and washers
Information and safety
Instructions for use and legal information about the product
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔧 Do I need to solder to install these potentiometers?
Yes. Three through-hole pins to desolder on the old part, three to solder on the new one. A fine-tip iron, solder and desoldering braid are all you need.
🎮 What builds can I use them in?
In any build that accepts a 3-pin WH148 rotary potentiometer: arcade machine, amplifier volume stage, control panel or DIY enclosure. They aren't suitable for slide potentiometers, rotary encoders or SMD models.
🔢 Does the pack contain several different values?
No. Each pack contains 10 potentiometers of the single value selected, from 1 kΩ to 1 MΩ. It isn't an assortment.
🔊 Are they suitable for an audio volume control?
The track is linear: the progression will sound uneven, concentrated at the start of the travel. For volume, a logarithmic track remains more comfortable.
📦 What's in the box?
10 WH148 rotary potentiometers with a 15 mm shaft and 3 pins, in the value chosen, with their mounting nuts and washers. No knob or shaft cap is included.
🧰 What tools do I need?
A fine-tip soldering iron, solder, desoldering braid or a pump, and a spanner or screwdriver for the panel mounting nut.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ What warranty applies?
2-year legal guarantee of conformity. 14-day returns. Our French-speaking customer service replies within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on