Full description
GuliKit NS51 TMR joysticks: the anti-drift repair part, single or in packs
When a controller drifts, it is almost always the joystick's resistive track that has worn out. The GuliKit NS51 replaces this module with a joystick using a TMR magnetic sensor, which reads the position with no rubbing contact. Available from 1 to 10 pairs, it is aimed as much at the player repairing their own controller as at the workshop repairing several.
What it does
- Contactless TMR sensor: no track that wears out through friction, so no more drift caused by that wear.
- One version per controller: PS4, PS5, Xbox Series and Switch Pro, in the format of the original module.
- Packs of 1, 2, 5 or 10 pairs: enough to repair one controller or a whole batch.
What it doesn't do
- On PS4, PS5 and Xbox Series controllers, the original joysticks are soldered: installation involves desoldering, this is not a clip-in part.
- They do not fix drift caused by a damaged board or a software fault.
- They are not suitable for Joy-Con.
- No tension adjustment on this model: for that, see the GuliKit series with adjustable tension.
Compatibility
PS4 controller (DualShock 4), PS5 controller (standard DualSense), Xbox Series X|S controller and Switch Pro controller: choose the variant that matches your controller, the versions are not interchangeable. Not covered: Joy-Con, Elite Series 2 and DualSense Edge controllers, third-party controllers.
Skill level required
Advanced on PS4, PS5 and Xbox Series: disassembling the controller, desoldering the old joysticks (desoldering pump or wick, fine-tip iron) then soldering the new ones. On Switch Pro, write to our customer service before ordering to find out the procedure. Have precision screwdrivers, a plastic spudger and flux ready.
In the box
- 1, 2, 5 or 10 pairs of TMR joysticks (2 joysticks per pair) depending on the variant, in the chosen version.
Delivery in 10 to 18 days · dispatched within 3 to 5 days · 2-year legal guarantee · 14-day returns.
GuliKit NS51 TMR joysticks — PS4, PS5, Xbox Series, Switch Pro, packs of 1 to 10 pairs
Joysticks with TMR magnetic sensor to repair a drifting controller, in packs of 1 to 10 pairs.
In stock
📦Dispatched within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: setting a controller straight again
A crosshair that slides, a character that walks on its own: the controller drifts because its joystick is worn. Open it, desolder the old module, solder the NS51 in its place and close it up. The controller is back in action with a joystick that no longer relies on a resistive track, and it is often the very controller you thought was only fit for the bin.
The part: a joystick with no rubbing contact
GuliKit is one of the recognised makers of contactless joysticks. The NS51 uses a TMR sensor, which measures position through a magnetic effect instead of a wiper on a track. Each controller has its own version, in the format of the original module, and the packs of 5 or 10 pairs serve workshops that repair in batches.
Before soldering: what to plan for
Desoldering a joystick requires a fine-tip iron, flux and a pump or wick, along with patience so as not to lift a pad. If you are new to soldering, write to our customer service before ordering: it replies within 1 business day to tell you whether the job is within your reach.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- TMR magnetic sensor, no track to wear out
- Dedicated version for each controller
- Packs of 1 to 10 pairs for workshops
- Sold in pairs, left and right
Ce qu’il ne fait pas
- Desoldering required on PS4, PS5 and Xbox Series
- Does not fix a damaged board
- Not compatible with Joy-Con
- No tension adjustment
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- Replacement joystick
Compatible avec
- PS4 controller (DualShock 4)
- PS5 controller (DualSense)
- Xbox Series X|S controller
- Switch Pro controller
Dans la boîte
- 1, 2, 5 or 10 pairs of TMR joysticks depending on the variant
Informations et sécurité
Consignes d'utilisation et informations légales du produit
Pièces détachées et modding : installation et sécurité
- Installation réalisée par l'utilisateur. Elle demande des compétences en démontage ou en électronique et peut annuler la garantie constructeur de la console d'origine.
- Éteignez l'appareil et retirez piles et batterie avant de l'ouvrir.
- Composants sensibles à l'électricité statique : touchez une surface métallique reliée à la terre ou portez un bracelet antistatique avant de les manipuler.
- Écrans et vitres : en cas de casse, le verre peut couper.
- Respectez la tension indiquée sur la fiche : une mauvaise alimentation détruit le module.
- Contient des petites pièces : ne convient pas aux enfants de moins de 3 ans.
Origine, responsable et contact
- Produit et emballage d'origine fabricant : les inscriptions peuvent être en chinois ou en anglais. Les caractéristiques du produit sont décrites en français sur cette page.
- Utilisez ce produit uniquement pour l'usage décrit sur cette page, en suivant les consignes ci-dessous.
- Responsable de la mise sur le marché dans l'UE : JMR-Service (Fun-Esports). Pour ses coordonnées complètes, reportez-vous à nos CGV.
- Un problème de sécurité (surchauffe, odeur de brûlé, pièce cassée) ? Arrêtez d'utiliser le produit et écrivez-nous à contact@fun-esports.com.
- Garantie, retours et rétractation : voir notre page Garantie et retours.
Frequently Asked Questions
🔧 Do I need to solder to install these joysticks?
Yes on PS4, PS5 and Xbox Series controllers: the original joysticks are soldered to the board, so you have to desolder them and then solder the new ones. On Switch Pro, contact our customer service before ordering.
🎮 Which variant should I choose?
The one for your controller: PS4, PS5, Xbox Series or Switch Pro. The versions are not interchangeable.
🧲 What is a TMR joystick?
A joystick that reads its position using a magnetic sensor, with no rubbing contact. It has no resistive track to wear out, the main cause of drift on conventional joysticks.
📦 How many joysticks are in a pair?
Two: enough to replace the left stick and the right stick of one controller. The packs of 5 and 10 pairs are aimed at workshops.
🎚️ Is the tension adjustable?
No, not on the NS51. The GuliKit series with adjustable tension is offered on a separate product page.
🧰 What tools do I need?
Precision screwdrivers, a plastic spudger, a fine-tip soldering iron, a desoldering pump or wick, and flux.
🚚 What are the delivery times?
Delivery in 10 to 18 days, dispatched within 3 to 5 days.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns. Customer service replies within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le