Full description
iBlueControlMod internal Bluetooth adapter: the GameCube goes wireless
Original wireless controllers for the GameCube are rare, and external adapters clutter the ports. This Hispeedido board is installed inside the console and lets it recognise modern Bluetooth controllers, up to four at a time, without soldering or cutting. Wired GameCube controllers keep working.
What it does
- Wireless controllers recognised: PS3, PS4 and PS5 controllers, Xbox One S and Xbox Series, Wii U Pro, Switch Pro and Joy-Con, among others.
- Up to four players: four Bluetooth controllers at once, or a mix of wireless and wired controllers across the four ports.
- Internal installation: no soldering, no shell cutting, no cable sticking out.
- Settings and updates: button mapping is configured and the firmware is updated from a Bluetooth-equipped computer.
What it doesn't do
- This is not a BlueRetro. The BlueRetro app does not work with this board, and installing the BlueRetro firmware on it damages it.
- Updates and settings are done from a computer, not from a phone.
- It does not make a wired controller wireless: it is the console that receives Bluetooth.
- It does not apply to the Wii, even though it accepts GameCube controllers.
Compatibility
GameCube console. Bluetooth controllers recognised: PS3, PS4, PS5, Xbox One S, Xbox Series X|S, Wii U Pro, Switch Pro, Joy-Con and other common wireless controllers. Cannot be installed in a Wii or any other console.
Skill level required
Intermediate level, no soldering or cutting. You need to open the GameCube with a 4.5 mm security screwdriver ("gamebit" bit), access the controller port area, install the board and close it up. A computer with Bluetooth is then used for settings and updates.
In the box
- 1 iBlueControlMod internal Bluetooth adapter board for GameCube.
Delivery in 10 to 18 days · dispatched within 3 to 5 days · 2-year legal guarantee · 14-day returns.
GameCube internal Bluetooth adapter — Hispeedido iBlueControlMod, no soldering
Internal board that lets the GameCube recognise up to four Bluetooth controllers, no soldering.
In stock
📦Dispatched within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: cutting the cord without picking up the iron
You open the GameCube with the security screwdriver, install the board near the controller ports and close it up. On the next start-up, a PS4, Xbox or Switch Pro controller pairs via Bluetooth and plays the games from the sofa. The original wired controllers can still be plugged into the same ports.
The part: Hispeedido's iBlueControlMod
Hispeedido, a recognised maker of modding kits for retro consoles, designs this board with its own firmware. It handles up to four wireless controllers and is configured from a Bluetooth computer. It is not a BlueRetro: never install that firmware on it, it would damage the board.
Before opening: the tool and the computer
Have a 4.5 mm security screwdriver ready for the GameCube shell and a Bluetooth-equipped computer for settings and updates: a phone is not enough. A question about pairing a controller? Our customer service replies within 1 business day.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- Modern Bluetooth controllers on GameCube
- Up to four wireless controllers at once
- Wired controllers still usable
- Internal installation without soldering or cutting
What it doesn’t do
- Not a BlueRetro: BlueRetro firmware incompatible
- Settings and updates from a Bluetooth computer, not a phone
- 4.5 mm security screwdriver required
- GameCube only, not the Wii
See full specifications+
Material and size
- Accessory type
- Wireless controller adapter
Compatible with
- GameCube
- PS3, PS4, PS5 controllers
- Xbox One S and Xbox Series controllers
- Wii U Pro, Switch Pro and Joy-Con controllers
In the box
- 1 iBlueControlMod internal Bluetooth adapter board
Information and safety
Instructions for use and legal information about the product
Controllers and peripherals: safety and use
- Wireless models: charge with a USB charger in good condition and stop using the device if the battery swells or gets abnormally hot.
- Do not pull on the cable to unplug. Do not leave a cable across a walkway.
- Take breaks if your hands, wrists or forearms feel tired.
- Contains small parts (USB receiver, buttons, sticks): not suitable for children under 3.
- End of life: take the device to a collection point for electrical equipment.
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔧 Do I need to solder to install the adapter?
No. The board is installed inside the GameCube without soldering, without cutting the shell and without an external cable.
🎮 Which controllers are recognised?
PS3, PS4 and PS5 controllers, Xbox One S and Xbox Series X|S, Wii U Pro, Switch Pro and Joy-Con, as well as other common Bluetooth controllers. Wired GameCube controllers remain usable.
👥 How many controllers at the same time?
Up to four Bluetooth controllers, or a mix of wireless and wired controllers spread across the console's four ports.
🔵 Is it a BlueRetro?
No. This board uses its own firmware. The BlueRetro app does not work with it, and installing the BlueRetro firmware on it damages it.
💻 How do I update or change the button mapping?
From a Bluetooth-equipped computer. Phones are not supported for these operations.
🧰 What tools do I need?
A 4.5 mm security screwdriver ("gamebit" bit) to open the GameCube and a Phillips screwdriver for the internal screws.
🚚 What are the delivery times?
Delivery in 10 to 18 days, dispatched within 3 to 5 days.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns. Our customer service replies within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on


