Full description
28-pin FRAM memory chip: the save that survives a dead battery
On an arcade board or a retro project, saved data depends on a lithium battery soldered in thirty years ago. The day it gives out, settings, high scores and configuration go with it. FRAM is non-volatile memory that retains data without a battery and is written at SRAM speed: it is the component fitted in place of the original memory in so-called battery-less mods.
What it does
- Retains data without power: no lithium battery, no backup capacitor to keep an eye on, no save lost after months in storage.
- Writes like an SRAM: immediate parallel access, with no write cycle or programming sequence as on an EEPROM or Flash, and with far higher write endurance.
- Three part numbers to choose from: FM1808-70 (5 V, 32 K × 8), FM18W08 (2.7 to 5.5 V, 32 K × 8), FM16W08 (2.7 to 5.5 V, 64 K × 8). Order the one your board expects.
What it doesn't do
- It is a standard memory component, with no embedded software.
- It cannot be fitted without soldering: a 28-pin surface-mount component, supplied bare, with no socket or adapter board.
- It does not recover a save that has already been lost: after replacement, the board restarts with blank memory that must be reconfigured.
- The supplier states an SSOP-28 package while the original listing says SOP-28: the exact package width remains to be confirmed, so compare your board's footprint before ordering.
- The manufacturer and markings are not guaranteed: component of Chinese origin, sold without a certificate of authenticity.
Compatibility
Intended for boards that use a battery-backed 28-pin parallel memory: arcade boards, retro computing builds, DIY projects. Compatibility is checked against your board's schematic, with the pinout and supply voltage to hand. Does not replace an I²C or SPI serial memory, a program EPROM or Flash, or a through-hole DIP-28 package: the format sold here is a surface-mount package.
Skill level required
Experienced. You need to desolder the original chip and fit the new one: hot air station or fine-tip iron, flux, desoldering braid, isopropyl alcohol and an anti-static wrist strap. A magnifier or stereo microscope helps a lot with a 28-pin pitch. If you have never done SMD work, practise on a scrap board before touching yours.
In the box
- 1 28-pin FRAM memory chip, in the selected part number (FM1808-70-SG, FM18W08-SG or FM16W08-SG).
- Sold individually: no socket, cable or printed documentation.
Listing verified on 19 August 2026. Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.
Read before ordering: Retro peripherals
28-pin FRAM memory chip FM1808, FM18W08 or FM16W08 — battery-free
28-pin non-volatile memory for battery-free mods — SMD soldering required, sold individually.
In stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: taking the battery out of the circuit
An arcade board that loses its settings every time the power goes off almost always has the same problem: the lithium battery that powered its memory is flat, if it hasn't leaked onto the traces. Replacing the battery only postpones the problem by a few years. Fitting an FRAM in place of the original memory removes the battery from the circuit: the board keeps its data on its own, even after months in storage.
The part: why FRAM and not EEPROM
FRAM behaves like RAM: the circuit writes to it immediately, without waiting for a programming cycle and without any special sequence, something an EEPROM or Flash cannot do. It also withstands an incomparably higher number of writes. Three part numbers are available: FM1808-70 at 5 V, FM18W08 and FM16W08 with a wide 2.7 to 5.5 V voltage range, the latter offering twice the capacity. Always follow the part number your board expects.
The limit: what we tell you before you buy
This is a bare component, surface-soldered across 28 pins: without a hot air station or fine-tip iron, the job is out of the question. The package is stated as SSOP-28 by the supplier while the original listing mentions SOP-28: compare your board's footprint before ordering. Finally, the manufacturer is not guaranteed and the chip arrives blank: a save that has already been lost will not come back.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- Retains data without a battery or backup capacitor
- Immediate writes, like an SRAM
- Far higher write endurance than an EEPROM
- Three part numbers: 5 V or 2.7-5.5 V, 32 K x 8 or 64 K x 8
- Sold individually, same price for all three part numbers
What it doesn’t do
- 28-pin SMD soldering required: no socket or adapter included
- Does not restore a save that has already been lost
- Package stated as SSOP-28 by the supplier, SOP-28 in the original listing: check before ordering
- Does not replace an I2C/SPI serial memory, a program EPROM or Flash, or a DIP-28 package
- Manufacturer and markings not guaranteed
See full specifications+
Material and size
- Accessory type
- 28-pin FRAM memory chip
Compatible with
- Arcade boards with battery-backed memory
- Battery-less mods
- 8-bit and 16-bit retro computing
- DIY projects with 28-pin parallel memory
In the box
- 1 28-pin FRAM memory chip (part number of your choice)
Information and safety
Instructions for use and legal information about the product
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔧 Do I need to solder to fit this chip?
Yes. It is a 28-pin surface-mount component: you need to desolder the original memory and then fit this one, with a hot air station or a fine-tip iron with flux and braid. No socket or adapter is included.
🔋 Why replace the original memory with FRAM?
Because FRAM retains data without power. The lithium battery that kept the memory alive becomes unnecessary, and with it the risk of leakage onto the traces.
🎮 Which boards can it be used on?
On boards that use a battery-backed 28-pin parallel memory: arcade boards, retro computing, DIY builds. Check against your board's schematic, with the pinout and voltage to hand.
🧩 Which part number should I choose?
FM1808-70-SG at 5 V (32 K x 8), FM18W08-SG at 2.7 to 5.5 V (32 K x 8), FM16W08-SG at 2.7 to 5.5 V (64 K x 8). Follow the part number given in your board's documentation rather than the highest capacity.
🚫 Is it a modchip?
No. It is a standard memory component, with no embedded software and no protection bypass function.
📦 What's in the box?
One 28-pin FRAM memory chip, in the part number chosen. It is sold individually, with no cable or printed documentation.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns. French-speaking customer service, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on
