Full description
Tip cleaner: a clean tip without cooling down the iron
In the middle of a motherboard recap or an IPS screen install, the tip gets coated in oxide and the solder stops flowing. A wet sponge, on the other hand, drops the temperature by more than a hundred degrees with every wipe and wears out the coating. This metal wire ball cleans dry: dip the tip in, pull it out, and the iron is still at temperature.
What it does
- Dry cleaning: the metal wire scrapes off oxide and excess solder without thermal shock, unlike a damp sponge.
- Contained residue: solder shavings fall into the metal base instead of ending up on the workbench or the board.
- Replaceable ball: when the wire is saturated with solder, you replace the ball and keep the base.
- No consumables: no water to change, no sponge to dampen before each session.
What it doesn't do
- It doesn't desolder anything. The supplier's original title mentions “desoldering”: that's wrong. To remove solder, you need a desoldering pump or wick.
- It doesn't restore a tip that has already turned black. If the coating no longer takes solder, you need a tip tinner, not a cleaner.
- It doesn't replace flux or solder, and doesn't clean a hot air station nozzle.
- The metal wire wears out: it becomes saturated with solder and is replaced like a consumable.
- Rubbing too hard scratches the coating of a low-end tip — dip, don't scrape.
Compatibility
A passive accessory, independent of the iron's brand and wattage: it suits soldering irons with fine, conical or chisel tips, adjustable-temperature stations and cordless battery-powered irons. No connection, no electronics. However, it isn't designed for hot air nozzles or engraving tips.
Skill level required
None. The accessory sits on the workbench and is ready to use straight away: dip the hot tip into the ball, move it back and forth twice, and re-tin with a little fresh solder before putting the iron back. Remember to empty the base when shavings build up.
In the box
- 1 metal wire cleaning ball.
- 1 metal base, depending on the variant chosen.
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.
Soldering iron tip cleaning ball — dry cleaning
Dry tip cleaning, with no thermal shock and no sponge to dampen.
In stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee of conformity · 14-day returns.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
It's not the iron, it's the tip
A soldering iron that no longer wets is almost never the iron's fault: it's the tip, covered in a black layer of oxide that stops the solder from taking. On a retro console, it's those extra seconds spent pressing on a pad that lift a trace. Cleaning every two or three joints is enough to keep a tip shiny from the start to the end of a recap.
Metal wire rather than a sponge
The wet sponge used to be the default workshop solution, but it abruptly cools the tip with every wipe, and these cycles wear out the tinning. Metal wire works dry: the tip stays at temperature, you keep going without waiting for it to heat back up, and solder residue falls into the base instead of ending up on the board.
What you'll need alongside it
It's a workshop tool, not a miracle one. It cleans, it doesn't repair: a tip already blackened down to the copper needs a tip tinner, and removing solder from a board needs a pump or wick. The ball itself is a consumable that becomes saturated over time — the metal base, on the other hand, is kept.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- Dry cleaning, with no drop in tip temperature
- Solder shavings stay in the metal base
- Replaceable ball, you keep the base
- Compatible with all standard tips
- No consumable to dampen before use
What it doesn’t do
- Doesn't desolder: it's neither a desoldering pump nor wick
- Doesn't restore a blackened tip: you'll need a tip tinner
- The wire becomes saturated with solder and is replaced like a consumable
- Not suitable for cleaning a hot air nozzle
- Exact contents not confirmed for each variant
See full specifications+
Material and size
- Accessory type
- Soldering tip cleaner
Compatible with
- Fine-tip soldering iron
- Soldering iron with conical or chisel tip
- Adjustable-temperature soldering station
- Cordless battery-powered soldering iron
In the box
- 1 metal wire cleaning ball
- 1 metal base, depending on the variant chosen
Information and safety
Instructions for use and legal information about the product
Soldering and desoldering: safety
The tip and nozzle reach 450 to 480 °C: risk of severe burns. Always put the iron back on its stand and let it cool before putting it away.
- Never leave a switched-on iron unattended. Unplug it after use.
- Work on a non-flammable surface in a ventilated room. Fume extraction is recommended.
- Wear safety glasses: solder can spatter.
- Hot air: never point the airflow at a person or a flammable material.
- Keep out of reach of children.
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔧 What is this cleaning ball for?
For dry-cleaning a soldering iron tip: the metal wire removes oxide and excess solder without dropping the iron's temperature.
💧 Why not a wet sponge?
A wet sponge cools the tip by more than a hundred degrees with every wipe. These thermal cycles wear out the coating and lengthen the heat-up time between joints.
🎮 Is it compatible with my soldering iron?
Yes. It's a passive accessory with no connection: it suits all standard tips, fine, conical or chisel, on a basic iron, an adjustable station or a cordless iron.
🧲 Does it desolder a component?
No. The supplier's original label wrongly mentions desoldering. To remove solder from a board, you need a desoldering pump or desoldering wick.
📦 What's in the box?
A metal wire cleaning ball, and a metal base depending on the variant chosen. The supplier's three variants differ in the shape of the base.
♻️ Does the ball wear out?
Yes, it's a consumable. The wire becomes saturated with solder over months of use: you then replace the ball and keep the metal base.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ What warranty applies?
2-year legal guarantee of conformity. 14-day returns. French customer service, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on